630mm Centralized Listing-Rigid Stranding Machine Long Length And Section Bare Aluminum and copper

Rigid Stranding Machine can manufacture copper wire and copper tape shielding cable. It is suitable for armoring of copper, round aluminum wire, pre-twist sector conductor and steel wires armoring cables.

Stranding Machine:

General Description:

This machine (with lumped loading device) is suitable for producing large length, compact ,bare Al/Cu wire, and ACSR, aluminum alloy wire and sector conductor. The machine is driven by separate motor for each cage and dual capstan; the stranding pitch can be adjusted by Touch screen.

Main Capability Characteristic:

The machine with dual active, dual hauling capstan, its haul force is so strong that can reach to 15T. Natural wire distribution for preventing abrasion damage of wire cores when stranding. Wire pay-off tension is controlled pneumatically to guarantee constant tension in full loaded bobbin or empty bobbin. With automatic emergency stop device, in case of wire break the device can control directly every pay-off bobbin in the cage and the entire machine will automatically stop at once.

Automatic Side loading and unloading Device:

Centralized loading device works in 90 degree and it compromises four steps: Griping, turning, moving and loading. The whole

loading and unloading action is very fast. It is easy to operate and reliable

When the loading carriage travels to the location where the bobbin is stored, it will rise vertically to grip the bobbin. Once the bobbin is gripped, a mechanical locking system will lock the bobbin and a turning motor will turned the bobbin to the horizontal position. This device has limit control. The turning motor will turn the bobbin only when the bobbin is locked. In this way, safety of loading and unloading can be ensured.

Safety Cover of Each Cage

Adopt fully closed cover to make sure cage rotating under fully seal up condition, protection cover can open when bobbin-loading or cage stop, it is driven by motor, easily to operate.

Our policy "Brave in Innovation, Rely on Technology". We are insisting to bring in advanced technology from abroad and doing systematic expansion over these years. We gradually develop an experienced mechanical and electronic research team with the ability of independent design and large-scale production.

Depend on many years production and service experiences, we gradually creative new technology and improving our products, our machine has sold all around China, and also sold to America, Russia, Vietnam, India, and Africa, etc. Good technical support and after-sale service, win perfect customer response from China and aboard.

The line length depends on the configuration and the cage design.

Cage length 6V-5200 mm
Cage length 12V-6600 mm
Cage length 18V-8000 mm
Cage length 24V-9400 mm
The example of 1+12+18 line operational principle. Workpieces pass through the cage individual bandwidth channels system and exit through holes of the outside separator.

The central workpiece in the center, and 12 workpiece (wires) from the 12V cage are overlapped around it.

Cores are crimped in the die, where stranding process occurs due to the cage rotation. Through this process, the first lay (1+12) is made. When passing through the sealing device with pre-twisting function, the lay receives a seal by using crimping pairs of rear rolls and additional stranding, which is necessary in the sector cores manufacturing.

After passing the next 18V cage, 18 workpiece (wires) will be applied to 1+12 lay (wires) in a similar way. The stranding algorithm of different cores structure is identical.

Beyde Trading Co.,Ltd.(Know as Beyde) is the representative office for cable stranding machine factory(Built in 1995)in Hebei, China. BEYDE was set up to meet international business for those factories. One hour and a half hours from Tianjin Port, China, BEYDE keeps superior quality and competitive offers for global valued customers.

BEYDE Trading Co.,Ltd. is a manufacturer engaged in producing cable machines many years. The main products in our company including wire drawing equipments, cable stranding machine, strandingmachinery, plastics extruder and cable Reel drum. We always insists on using the best material to make the machine, so our machines are durable than general machine. We have a lot of customers who use our machine over than 20 years and still using now. Besides, We are makers by ourselves, not machine traders. Therefore, We sell to customers at a low price. We can design any types machine according to the demand of customers. We offer professional technique and services to our customers. Service overseas is provided by our company. We look forward to become your most valuable partner in the future. Let us create a wonderful future!

In 2019, due to the continuous increase of orders, the original production workshop could no longer meet the production requirements. Therefore, the management

of the company decided to repurchase a new piece of land of 10,000 square meters, and built the second processing plant in half a year. branch, and recruited 50

skilled workers, led by professional team personnel, and achieved good benefits, greatly relieving the pressure of production.

Beyde company is used for international advanced cable and wire processing equipment. In China, we are the only real manufacturers with independent processing and design capabilities.

The company produces 200-300 cable machines per year, especially pipe stranding machines, accounting for 60% of the Chinese market.